Don't hesitate to send a message
Ningbo Yinzhou HENTACH Electromechanical Co., Ltd. was established in 1995. For more than 20 years, we have been committed to the casting and processing of miniature DC motors, hub motors for electric vehicles and motorcycles, and aluminum and magnesium alloys for electric vehicles. At the same time, we have a complete ISO9001 quality control system, mature management system and advanced manufacturing and testing equipment.
HENTACH has an area of more than 9,000 square meters, with a construction area of 5,000 square meters. Currently we have more than 60 sets of various internal production equipment including 500 tons die-casting machines, precision CNC machine tools, laser marking machines, micro-arc oxidation, etc., and another two sets of electric vehicle motor test benches.
As China Miniature DC Motors Manufacturers and Electric Vehicle Hub Motor Factory, HENTACH aims to pursue higher quality and innovation products. With rich experience in motor manufacturing, we are confident with our motor quality as we always use the materials and our own patented nylon-steel gear. We used to set up a price for the customers who use our motors for over 30,000 miles. In the end we find over 50 motors that are used by the customers for over 30,000 miles and some of them even reach 50,000 miles. We appreciate for those customers who are always trust our products, which also encourage us to keep exploring and innovating better motor with quality.
Ningbo Yinzhou HENTACH Electromechanical Co., Ltd. manufactures Miniature DC Motors and geared hub motors for electric two-wheelers and light mobility platforms. Since 1995, we have combined in-house die casting, precision machining and motor assembly to supply OEM and ODM programs for e-bikes, cargo vehicles, AGVs, golf cars and agricultural machinery. Our Miniature DC Motors manufacturer range covers front and rear hub configurations from 180 W to 2000 W, with patented nylon-steel gearing and ISO 9001 quality control.
Miniature DC hub motors sit inside the wheel and see the full road environment: rain, dust, salt spray, repeated curb strikes and sustained torque demand on climbs. In city traffic the duty cycle is dominated by frequent start-stop events, so copper losses and gear wear accumulate quickly if the magnetic circuit and gear material are not matched to the application. Cargo and fat-tire platforms add high payload and low-speed torque requirements that push the motor toward higher peak current and stronger gear teeth.
We design around these conditions rather than treating the motor as a catalogue part. Our die-cast aluminum-magnesium alloy housings, micro-arc oxidation surface treatment and sealed cable exits are selected to keep water and grit out of the stator and gear chamber. The patented nylon-steel gear is the core durability element in this range: it is specified to carry continuous torque above 100 Nm in rear cargo and fat-tire builds, with a wear rate well below that of all-nylon gears.
The range is organised by vehicle application, so a project team can start from the platform type and then refine power, mounting and drivetrain. Each application family below contains front and rear hub motors with different torque and weight targets.
High-torque 750–2000 W hub motors with 175/190 mm OLD and thru-axle options for sand, snow and off-road fat bikes. Peak torque up to 170 Nm.
Lightweight 180–400 W outer-rotor motors such as HT MINI and C-Type R350, tuned for quiet start-stop riding and low weight (from 1.95 kg).
250–2000 W rear and front hub motors with cassette/freewheel compatibility, designed for heavy loads and repeated starts on urban gradients.
Compact front and rear hub motors for road and gravel frames, with low weight, smooth power delivery and thru-axle mounting options.
Torque-rich rear hub motors with sealed bearings and impact-resistant housings for trail and EMTB use.
Hub motors for light scooters and shared mobility, with compact packaging and sealed connectors for high utilisation.
Complete wheel assemblies combining motor, rim and spoke build for faster line integration and reduced assembly steps.
The table below shows representative models from our current range. Power figures are rated ranges; final selection depends on wheel size, rider weight, terrain and controller limits.
| Model | Application | Power (W) | Stall Torque (Nm) | Weight (kg) |
|---|---|---|---|---|
| E-Type F500-1 | Front / City / Cargo | 250–500 | 75 | 4.2 |
| E-Type RC750-2 | Rear / Cargo / Fat | 350–750 | 85 | 5.3 |
| S-Type Pro F1500 | Front / Fat | 750–1500 | 145 | 5.5 |
| S-Type R2000 Thru Axle | Rear / Fat / Cargo | 1000–2000 | 160 | 7.9 |
| HT MINI | Front / City | 200–250 | 40 | 1.95 |
Every motor programme begins with the frame interface and the target riding profile. We confirm dropout width and axle type, then select the winding, gear ratio and controller settings to meet speed and torque targets. Cassette, freewheel and thru-axle versions are available across the range, and cable exit direction can be specified for clean frame routing.
Hub motors integrate with standard e-bike controllers through hall sensor and phase connections. For projects adding torque sensing, CAN bus or IoT telemetry, we agree the signal interface and connector pinout during the sample stage so the vehicle harness and battery management system are aligned before tooling is released. We also support matching of the motor speed constant to the controller's field-weakening strategy when higher assisted speeds are required.
Our ISO 9001 quality system covers incoming material inspection, die-casting and machining checks, winding and assembly controls, and final motor testing. Two dedicated electric vehicle motor test benches run no-load, load and torque checks on production samples. Sealing and waterproof performance are verified on IP65-rated models, and gear mesh is inspected for noise and backlash before packing.
Hub motors are supplied with axle nuts, torque washers and connector-specific cable tails. Installation requires correct torque on the axle nuts and alignment of the torque washer with the dropout; we provide written installation guidance and torque values with each shipment. Because the gear chamber is sealed, field service is limited to external inspection, connector checks and bearing replacement at end of life. Spare gears, bearings, axle hardware and cable assemblies are available as service parts for series programmes.
To prepare a motor specification and quotation, we need the project inputs below. This list reflects the variables that change winding, gear ratio, housing and cable configuration.
| Project Input | What It Determines |
|---|---|
| Vehicle type and target market | Application family, rated power ceiling and compliance context |
| Wheel size and tire width | Motor speed constant, spoke flange and rim clearance |
| Dropout width and axle type | Front/rear housing, OLD, thru-axle or nutted axle |
| Rider and payload weight | Torque requirement and gear selection |
| Battery voltage and controller limits | Winding, rated current and connector choice |
| Drivetrain type | Cassette, freewheel or single-speed body |
| Annual volume and ramp-up plan | Tooling, sampling schedule and production slot |
The S-Type Pro RC/RF rear motors and the S-Type R2000 Thru Axle are built for 175–190 mm applications. For sand and snow use we typically pair the R2000 with a 12 mm thru-axle frame; for cassette-based fat bikes the S-Type Pro RF provides 145 Nm peak torque at 600–1500 W.
Yes. Our Integrated Motor Wheel range combines the hub motor with rim and spoke build, which reduces wheel-building steps at the vehicle assembly line. Wheel size, rim specification and spoke count are agreed during configuration.
The composite gear is approximately five times stronger than all-nylon gears, allowing higher continuous torque and resisting tooth wear in start-stop duty. Real-world use has shown motors operating beyond 30,000 miles, with some units surpassing 50,000 miles.
The E-City series and selected E-Type and S-Type models are designed with sealed housings and IP65 protection for rain, dust and road spray. We confirm the sealing specification for each model in the quotation.
Custom harness length, connector type and cable exit direction are part of our OEM configuration. We need the controller connector drawing and the frame routing path to finalise the motor cable assembly.
Production motors are checked on our electric vehicle motor test benches for no-load current, speed, torque and noise. Sealing checks are applied to IP-rated models, and sample units can be supplied for vehicle-level validation before serial production.
Our portfolio also includes 2025 Highlights, E-Type F500-1, E-Type RC750-2 for applications with different operating ranges, interfaces or integration requirements.